商品详情
- 商品名称:Trek 10/40-HS,High-Speed, Non-Inverting High Voltage Amplifier, Output Voltage 0 to ±10 kV DC or Peak AC
- 商品编号:Trek_10/40-HS
- 店铺:网站自营
- 封装形式:台式
- 输出电压:±10 kV
- 带宽:23 kHz
更多参数>>
Advanced Energy’s 10/40A-HS is a DC-stable, high-speed, high-voltage power amplifier used in industrial and research applications. Its all-solid-state design enables a high slew rate, vast bandwidth, and low-noise operation
Output Voltage Range: 0 to ±10 kV DC or peak AC
Output Current Range: 0 to ±40 mA DC or 120 mA peak AC for 1 ms (must not exceed 40 mA RMS max)
Slew Rate: Greater than 900 V/µs
Large Signal Bandwidth (-3 dB): DC to greater than 23 kHz, typical
Gain: 1000 V/VOverview
The non-inverting Trek® 10/40A-HS is equipped with a four-quadrant, active output that sinks or sources the current into reactive or resistive loads throughout the output voltage range. This type of output is essential to achieve accurate output responses and high slew rates demanded by highly capacitive or reactive loads.
The Trek 10/40A-HS is optimal for electrophoresis, electro-optic modulation, material poling, and numerous other applications.
Benefits
- Drive capacitive loads via a four-quadrant output
- Enable high accuracy thanks to a closed-loop system
- Safeguard equipment with short-circuit protection
- Benefit from maintenance-free operation and solid-state design
- Take advantage of low-output noise and ultra-accurate outputs
Features
- NIST-traceable calibration certificate provided with each unit
- DC-stable for programmable supply applications
- Local and remote high voltage On/Off capabilities
- Switch selectable for current limit or trip
- CE compliant (230 VAC unit only)
评论晒单